2024 Vaderstad 2500 Series Folding 2530 CPW 19-23

2024 Vaderstad 2500 Series Folding 2530 CPW 19-23

The 2500 Series Chisel Plow from Wil-Rich integrates a deeper frame front to rear in a refined design, compared to its predecessor. The deep frame utilizes four ranks to improve the flow of heavy residue from today’s higher yielding crops. The 2500 Series not only has a deep frame, but also 3/8 in (9 mm) thick steel for even more strength. This makes it one of the strongest tillage implements on the market.

The Wil-Rich 2500 Series Chisel Plow is available in 12 or 15-in (30.5 or 38.1 cm) shank spacing and with trip pressure options of 650 lbs (295 kg) or 1,000 lbs (454 kg). Select sizes are also available with either a level lift or floating hitch. This allows it to be built to accommodate the specific needs of your operation.

Level lift hitches are designed to keep the unit level during field operation and transport. The operator can change working depth while maintaining consistent working depth from the front to the rear of the unit.

The floating hitch pivots between the tractor and the main frame. This pivot point allows the unit to follow the contour of the ground. The front castering gauge wheels are mechanically synchronized with the rear axle, allowing the unit to maintain level working depth from front to rear.

Hydraulic castering gauge wheels are standard on floating hitch models, and ratchet adjust castering gauge wheels are standard on 31 ft (9.45 m) and larger wings.

12R22.5 x 8.25 tires on 8-bolt hubs are used on all in-frame walking tandems to aid in wet working conditions and for increased reliability during transport.

The 2500 Series Chisel Plow has a number of point options.

The 1,000 lbs (453.6 kg) compression spring trip assemblies use Wil-Rich’s legendary on-edge shanks with wider, zero maintenance pivots that are designed for the life of the machine.